ARAI

Tour-X5 Discovery Blue

  • Akcija
  • Regularna cena €979,00
Cena sa PDV-om


  • New VAS-A visor system designed to maximize Glancing-Off Performance
  • Adventure, Off-road, and On-road possibilities
  • Enhanced 5mm wider on each side chin bar for easy on/off comfort
  • New forehead logo duct for excellent ventilation
  • Flat spot-on side of the shell for easy communication device installation

It is time for a new adventure with the all-new Tour-X5! It’s time to ride the earth!

The Tour-X5 is a completely redesigned helmet, packed with many new features. As with everything from Arai, every improvement is made with a priority for protection. And this new model brings us ever closer to the ideal Arai shape for protection.

Download Tour-X5 instruction manual.

FEATURES:

  • Outer Shell: PB-CLC2

Arai’s Peripherally Belted Complex Laminate Construction greatly increases shell strength and flexibility while maintaining low weight and a lower centre of gravity. Positioned across the top of the eye port, this band contributes to the use of a thinner EPS liner which greatly enhances the upward field of view.

  • Variable Axis System A (VAS-A)

This new visor system allows for easier and faster visor swaps. The visor can be attached or removed without the need for any tools. The peak utilizes only one screw on each side for easy removal & installation.
  • 3 Configurations

Multi-purpose styles for your ride: adventure, on-road, and off-road. Changing to either of the styles does not require additional parts. A more open eye-port is optimized for wearing goggles.
  • Ventilation

The FRONT Three-position chin vent helps in demisting the visor and offering fresh, cool air to the rider.

The new 3D Arai logo duct: at just 50km/h it’s channelling an extra 40% airflow, at 120km/h 7% compared to without.

As for the REAR ventilation: the one-piece rear exhaust/spoiler, operated by a 3-way switch. It efficiently draws air but also smooths airflow over the helmet: improving stability and reducing buffeting, especially while overtaking at highway speeds. The result is much less rider fatigue.
  • Aerodynamics: Pull Down Chin Spoiler

The retractable pull-down spoiler reduces wind intrusion into the bottom of the helmet and helps to pull out hot and humid air around the sculpted leading edges of the cheek pads.

  • Comfort
The exclusive shell flares 5mm on each side for a total of 10mm around the base, making it easier to get the helmet on and off.
  • Dry-Cool® Liner

Arai´s Dry-Cool® material transfers heat plus moisture away from the rider quickly and efficiently.

  •  Replaceable Interior

All parts can be cleaned with lukewarm water and mild soap. Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.

  • 5mm ’’Peel Away’’ Ear cups/Cheek pads

Giving even more ability to craft the perfect fit and comfort, the cheek pads feature a 5 mm peel away layer for added room if needed.

  • 5mm ’’Peel Away’’ Temple pad

Arai´s peel-away temple crown pads give the option of 5 mm more interior width if needed.

  • Facial Contour System FCS®

To offer an even better snug fit and enhancing the comfort to the lower jaw, the Facial Contour System FCS® works with a foam spring support in the cheek pad that compresses and rebounds, providing the necessary support without excessive pressure.

  • Emergency Release System (ERS)

Allows easier access to an injured rider. By pulling the orange tabs integrated in the pads, the cheek pads slide out. Making helmet removal easier for trained medical personnel and rescuers. Minimising the risk of additional injury.

 ARAI KEY FEATURES:

  • Handmade: It can take up to five years for our experts to earn the right to create an Arai shell. Each shell can take up to 27 steps and to build one Arai helmet will take about 18 man-hours.

  • Glancing Off: To minimize impact energy getting into the helmet, it’s crucial that a helmet can slide over a surface. Arai believes that a Strong, Round & Smooth shell helps to increase a helmets ability to protect the rider during an impact.

  • Smooth shape, better protection (R75 Concept): The smooth outer shell of Arai helmets is designed to glide without unnecessary resistance. You don’t want to decelerate your helmet more than necessary. That’s why all Arai vents and ducts are designed to break off during an impact.

  • Five times inspected: Each Arai helmet goes through five separate quality-control depart­ments: after the shell is made, after painting and graphic completion, after assembly and two in-process inspections.
  • All-day comfort: All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai.
  • Arai In-house test & Penetration tested: All Arai helmets are penetration tested, although not required by European helmet standards. Designed to meet the stringent Arai In-house criteria, in addition to the mandatory ECE 22-06 standard.
  • Double-D ring device: The flat and D-shaped rings fit smooth against the chin. No moving parts, no corrosion problems and just pulling the tab is enough to loosen the fastener.
  • 5-year limited warranty: All Arai helmets are warranted against defects in materials and workmanship, and are serviceable only for the properly fitted first user for 5 years from date of first use, but no more than 7 years from date of manufacture.
  • 3 Shell Sizes: XS-S/ M-L/XL-XXL
  • FREE Pinlock Included: Effectively prevents misting and fogging of the visor, even under extreme wet and damp conditions. May be cleaned and changed easily.
  • ECE22.06 Approved.